Products / Sanding Belts, Discs, Sheets & Flap Wheels / Sanding Discs
ZIRCONIA FILM SANDING DISCS
WW-ZF125-8H 125 mm Zirconia Hook-and-Loop Film Sanding Discs
Zirconia alumina sanding discs with a stable polyester film backing, hook-and-loop attachment and eight-hole dust-extraction pattern for controlled surface preparation and finishing.
Model WW-ZF125-8H · Diameter 125 mm · 8 holes · P60–P2000 available
Product Overview
WW-ZF125-8H is a 125 mm zirconia alumina sanding disc built on polyester film. The film support helps maintain a flat, consistent sanding surface, while the hook-and-loop back allows efficient disc changes. The available eight-hole format supports dust extraction when aligned with a compatible backing pad.
Key Product Features
- Zirconia alumina abrasive
- Dimensionally stable polyester film backing
- 125 mm / 5 inch disc diameter
- Eight-hole dust-extraction pattern
- Hook-and-loop attachment for efficient disc changes
- Available P60–P2000 grit range
Technical Information
Available product information is listed below. Final grit, hole alignment, packing and operating method are confirmed for each order.
| Item | Available Information | Status |
|---|---|---|
| Wewin model | WW-ZF125-8H | Wewin product reference |
| Abrasive | Zirconia alumina | Available specification |
| Backing | Polyester film | Available specification |
| Diameter | 125 mm / 5 inch | Available specification |
| Hole pattern | 8 holes | Available specification |
| Attachment | Hook-and-loop | Available specification |
| Grit range | P60–P2000 | Confirm availability by grit |
| Sanding method | Wet or dry | Confirm for the workpiece and process |
Stable Film Backing for Consistent Finishing
The polyester film backing is designed to resist tearing and maintain a more uniform abrasive surface than a flexible paper support. Use a compatible 125 mm eight-hole backing pad and align the perforations for effective dust extraction.
- Metal surface preparation and finishing
- Automotive refinishing and coating preparation
- Controlled wet or dry sanding after process validation
APPLICATION RECOMMENDATION
Recommended Applications and Selection Guidance
Green identifies this disc within the current product range, but color is not a universal abrasive-material standard. Confirm zirconia grain, grit, backing, hole pattern and pad compatibility before ordering.
- Choose coarser grits for stock removal and surface leveling
- Use progressively finer grits for scratch refinement and finishing
- Select film backing when dimensional stability and finish consistency are priorities
- For general wood sanding and lower-load work, an aluminum oxide paper disc may be the more economical choice
For high-value parts, confirm the complete sanding sequence through a controlled trial. The correct disc is selected by material, load, backing-pad system and finish requirement—not by color alone.
Related Products
WW-AO150-6H Aluminum Oxide Paper Sanding Discs
An economical paper-backed option for general sanding and surface preparation.
WW-CD125-8H Ceramic Paper Sanding Discs
Compare ceramic grain for higher-load dry sanding applications.
Request a Zirconia Film Disc Quotation
Send grit, quantity, backing-pad hole pattern, workpiece, sanding method and target finish. We will confirm the suitable configuration and packing before quotation.